Evergreen Test Technologies -
Contact

Temperature Scanner

Evergreen Test Technologies > Temperature Scanner

Temperature Scanner

Using the powerful architecture and interfaces enables the FlightDaq-TL to accurately measure a large variety of input types, convert the measurement to engineering units and then output the data over a number of configurable Ethernet interfaces. These interfaces can be the Chell protocol (TCP/IP or UDP), IENA, iDDS or Netscanner® simulation mode.

The two inputs can be individually configured to provide measurements for the following: Voltage, Resistance, Thermistor, Thermocouple inputs (using external cold junction such as a Smart Lemo), RTD385, Amplified pressure transducer, Ratiometric pressure transducer.

Features

Configurable acquisition system for PRT’s, thermocouples and pressure transducers

16 configurable inputs measuring resistance and voltage over a number of programmable ranges

Open-circuit-detect per channel

250Hz per channel measurement frequency

24 bit resolution

User configurable outputs over Ethernet – iDDS, Chell Protocol, IENA & Netscanner compatibility

Configurable 5, 10 and 24V excitation

Complete with IEEE 1588 PTPv2 time stamping

Compatible with Chell Smart Connectors

Power-over-Ethernet (PoE) or DC supply (user configurable)

Fully configurable over Ethernet with embedded web server

Contact For Details

Related Products

Smart Connector

Smart Connector The 2422 and FlightDaq-TL are advanced pressure, temperature and voltage scanners which have a digital bus connection for every channel. The Smart Connectors detailed here utilises this bus by communicating with the scanner and downloading identification and calibration information to the scanners. This enables all the data relevant to the transducer (be it pressure transducer, thermocouple, RTD or voltage signals) to be permanently connected to that transducer through[…]

Details...