Flight Series Pressure Scanners

The flightDAQ3 is another step forward in Chell’s long line of pressure scanners optimised for test cell and flight use. The flightDAQ3 makes use of high accuracy digital absolute transducers to give unparalleled performance – even in the most demanding environments.

The flightDAQ3 will output differential or absolute temperature compensated engineering unit pressure data over Ethernet with the Chell native protocol, IENA, and iDDS at speeds up to 400Hz per channel. It also features a Netscannner emulation mode where a subset of the Netscanner commands are supported.

For cold applications, it has an in-built heater to maintain valve operation at cold temperatures. The power of the heater can be selected to cope with different power supply scenarios. In addition, there is an internal purge control valve to switch the purge gas on and to vent it before the valve is returned to run.

With the addition of an iDDS run time license, the flightDAQ3 is fully compatible with iDDS installations.

Features

New and advanced use of digital sensor technology

Optional iDDS interface

Unparalleled Data Quality: up to 0.02% of full scale

High speed : 400Hz per channel

Absolute and differential measurements

Electrically driven valve for purge and re-zero

Power-over-Ethernet

Complete with IEEE 1588 PTPv2 time stamping

Internal Heaters for use down to -55°C

24 bit ADC per channel

Fully configurable over Ethernet with embedded web server

Quick disconnect measurement couplings

Output over Ethernet (100Mbit TCP/IP / UDP), Chell native protocol, Netscanner protocol, iDDS and IENA